수중 음향 센서
▶ 프리앰프
프리앰프 외장형
CCA1000
CCA 1000 Conditioning Charge Amplifier
- - 1Hz ~ 1MHz 대역폭, 입력 저항 선택
- - 저주파수 허용치 설정
- - 6단계의 Gain
- - 물 얼룩 방지
- - 하이드로폰과 프리앰프 사이의 케이블 거리가 길 때 사용
제품 사양
Input: | |
Impedance max.: | 1Gohm |
Max input at (unity gain): | 2Vp |
Estimating Input gain: | (dB) = 20 log Ctr/Cin |
Input capacitance selector: | 12 steps: 22pF to 10nF |
Input resistance selector: | 12 steps: 3.3kohm to 1Gohm |
Output: | |
Output gain settings 6 steps: | 0, 6, 12, 20, 26, 32dB |
Signal output, max: | 2Vp |
Output impedance: | 20ohm |
DC off-set: | 0 |
Bandwidth | |
Operating -3dB Frequency range at 20dB gain: | 1Hz to 1MHz |
Noise: | |
Input termination: | 1nF to GND |
Output noise with selector settings | |
1nF/1GOhm/0dB: | 2-4μVrms/A |
10nF/1GOhm/20dB: | 8-10μVrms/A |
1nF/1GOhm/20dB: | 14-20μVrms/A |
100pF/1GOhm/20dB: | 80-110μVrms/A |
Power supply: | |
Voltage: | min.: 12VDC max.: 24VDC |
Current consumption: | 40mA ±10mA at 12Vdc |
Lower frequency limit: | |
Frequency limits (-3dB) versus input resistance at 1nF | |
input load: | |
1GOhm | |
330Mohm | |
100Mohm | |
33Mohm | |
10Mohm | |
3.3Mohm | |
1ohm | |
330kOhm | |
100kOhm | |
33kOhm | |
10kOhm | |
3.3kOhm | |
Weight: | |
Including supply cable: | |
Input capacitance settings: To obtain close unity input gain from a hydrophone, - set the input capacitance selector to a capacitance value close as possible to the hydrophone (end of cable capacitance). The input gain is then calculated from: transducer capacitance Ctr. divided by the input capacitance Cin x 20 log = dB gain | |
Example: | |
a. 20 log (1nF/1nF) = 0dB | |
b. 20 log (8nF/4.7nF) = +4.62 dB gain |
USER INSTRUCTIONS |
Connect the supply cable to a battery or AC powered DC supply. The required voltage is 12 to 24VDC. DC supply common/ground should be connected to water for min. noise. |